1. Home
  2. Getting Started
  3. Set Up Targeting In AVID

Set Up Targeting In AVID

Targeting allows you to show ads to specific audiences based on the conditions you set up. It can be set up on an ad group level or on an ad level under the section labeled “Targeting”. Targeting must be enabled for a placement in order to be used, and there must be at least one targeting profile in place within the ad group or ad. Click here for step-by-step instructions on how to create a targeting profile.

AVID allows you to enable a number of targeting options to control conditions upon which your ads are being served: GEO TargetingSubID Targeting, Browser TargetingIP Targeting, Device Type Targeting, Carrier/ISP TargetingIP Type TargetingProxy IP Address Targeting, User Agent, and Language. For details on how to set up each of these types of targeting, click any of the links above.

Targeting

Any conditions added to the same profile will be AND conditions, meaning that all conditions must be met in order for the ad or ad group to be served. To create OR conditions, you will create a new profile. If there is more than one profile, then all conditions in Profile 1 must be met OR all conditions in Profile 2 must be met, etc. for the ad or ad group to be served. 

Warning:

If you have targeting set up that will potentially stop an ad from being displayed, you must have a backup ad(s) that either has the equal inverse targeting or has no targeting. If this is not done, you run the risk of being charged for an impression WITHOUT SERVING AN AD.

Note: once you have created the targeting profile, it is advisable to change its default name. You can save frequently used profile conditions as a template in the profile templates section. You can also turn targeting profiles on or off.

You can also watch this how-to video to see how targeting can be set up.

Updated on September 14, 2017

Was this article helpful?

Related Articles